Why the Concrete Polishing and Restoration world loves the FloorPro®
It’s a huge trend right now. Getting rid of your old tile, your old linolium, your old carpet…and replacing it with polished concrete floors.
Remodelers worldwide are finding that polished, restored concrete is much more economical, and looks great.
The problem is that the company who installs the new concrete(or installed the original) often likes to take the money and run before the concrete has been fully tested, that it’s within tolerance. Sometimes, it’s not even finished all the way to the wall.
But its not all their fault, they install the concrete, and get it all troweled, but a few months later the concrete has curled and the floor no longer is in spec. And we’ve got a problem on our hands.
Fingers get pointed, and questions are asked. The polishing company is often left holding the bag. The owner expects the polisher to finish what the contractor didn’t and to overcome the curled edges all for a quote based on neither. You need to back up your position.
The FloorPro® makes it easy to get the answer you need right away. You can communicate with the owner right away and get paid for problems that are inherent in the slab before you start work. You can even offer to measure the floor when the concrete is placed. That way you know it’ll be right for polishing.
The concrete polishing and restoration world loves the FloorPro® because:
It’s Easy to Use.
Within 90 seconds, you can have a FloorPro® out of the box, and ready to do a run. That’s by far the fastest time for all the floor measurement devices on the market, and it’s a no brainer.
The INSTANT runs.
Once you’ve setup the FloorPro® for its run, you just hit a button and the run begins instantly, on its own. Instant measurements, being displayed as you watch on the LCD screen. And what’s better? Just let the FloorPro® run while you go and do something else. Then get your results after it’s stopped and when you’re ready.
Cost.
The FloorPro costs 30% less than the F-Meter®. Yet it is easier to use, and the accuracy is just as good (if not better). What is the true cost of having to pull your machine across the floor day after day?
That it’s fast.
Because the FloorPro® is so fast (and so accurate)you can get more done and sooner. The runs happen so quickly that you might decide to do a couple extra. But you don’t have to…after all, you probably have some other things to attend to. And now you can.
http://flatfloors.com/floorpro.html
Until next time,
Carl Ytterberg
CEO Ytterberg Scientific, Inc.
PS – The FloorPro® costs 30% less than the F-Meter®. It is just as accurate (probably a lot more). It runs automatically. Why hold yourself back by tethering yourself to a string and having to tow something around? Free yourself. Click here:
http://flatfloors.com/floorpro.html
FloorPro® and TruFlat® are trademarks of YSI. F-Meter® is a trademark of the Allen Face & Company
Tags: concrete polishing, dipstick, f-meter, floor pro, floorpro